Jazzmaster Replacement Pickups
I wanted to archive this information. Taken from OffsetGuitars.com forum
Fender AVRI
Official reissue of a ’62-ish jazzmaster pickup. Good quality, faithful recreation of the vintage sound, although some feel they are a bit on the bright side. Cloth covered hookup wire.
Fender Japan
Decent quality pickups. However, these have a taller narrower central bobbin so the wind is shaped more like a Stratocaster pickup than ‘true’ Jazzmaster pickups, and this gives them a more Strat-like character with lower output and a thinner, brighter sound.
Semour Duncan SJM-1 Vintage for Jazzmaster
Good quality, faithful recreation of the vintage sound. Not quite as bright as the AVRIs. Supposedly based on the sound of a ’58 pickup. Uses Alnico V rod magnets. Cloth covered hookup wire.
Semour Duncan SJM-2 Hot for Jazzmaster
Overwound SJM-1, resulting in a lot more output and a bit more emphasis on the lows. Uses Alnico V rod magnets. PVC covered hookup wire.
Semour Duncan SJM-3 Quarter Pounder for Jazzmaster
Overwound pickup using long, 1/4″ thick Alnico V rod magnets, and a narrower and taller coil than a standard jazzmaster pickup. High output and a lot more emphasis on the mids. PVC covered hookup wire.
Semour Duncan Antiquity I for Jazzmaster
High quality detailed replica of an early black bottom jazzmaster pickup. These pickups have been slightly demagnitized to accurately simulate the sound of an aged original. Fairly dark tone. Alnico II magnets. Cloth covered hookup wire.
Semour Duncan Antiquity II for Jazzmaster
High quality detailed replica of a mid 60s grey bottom jazzmaster pickup. These pickups have been slightly demagnitized to accurately simulate the sound of an aged original. Brighter tone than Antiquity I. Alnico V magnets.Cloth covered hookup wire.
Curtis Novak Jazzmaster pickups
High quality custom made vintage replicas. Although based on an original ’63 pickup, since they are custom, you can have them wound to suit your specific requirements. He aslo offers P-90, PAF, Charlie Christian and standard humbucker pickups that will fit inside a jazzmaster pickup cover, with no modification required.
Jason Lollar Jazzmaster pickups
High quality custom made vintage replicas. Can also be wound to suit your requirements.