Enclosure Etch Woes

Here’s an example of a bad reverse etch. This is a perfect example of me trying to use a paint that is too thick/super glossy on a reverse etched enclosure.

What your looking at is a enclosure I reverse etched the text on and painted with a Krylon glossy yellow. I then tried to wet sand the top to expose the raised areas, the only problem is, there is no longer any raised areas. The paint filled in/up all raised areas making it impossible for me to sand away the paint to expose the aluminum.

So how do you know what paints work well for etching?

I have come to the conclusion that flat colors work the best. I am able to do a few thin layers and then oven dry it then wet sand to expose the etch. I then shoot the enclosure with a nice clear coat and call it done.

 

4 comments

Post a comment

You may use the following HTML:
<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>